Nissan Rogue 2010 2.5 - CSS Test

Automatic analyzing the cylinder pressure waveform
Post Reply
Dave08902
Posts: 3
Joined: Sat May 20, 2017 11:10 am

Nissan Rogue 2010 2.5 - CSS Test

Post by Dave08902 » Thu Jun 08, 2017 1:36 pm

This is a 2010 Nissan Rogue 2.5L I-4 QR25DE engine with 85,000 miles.
This is a good engine with no issues
Attached is the PSdata file
Channel 1 is Crankshaft
Channel 2 is Camshaft
Channel 3 is Cyl. 1 ignition

Thank You
Attachments
Nissan Rogue CSS Test Voltage.psdata
(38.74 MiB) Downloaded 307 times

admin
Site Admin
Posts: 18
Joined: Sun Mar 01, 2015 3:34 pm

Re: Nissan Rogue 2010 2.5 - CSS Test

Post by admin » Thu Jun 08, 2017 8:24 pm

Hello,
Converted file is attached
Nissan Rogue CSS Test Voltage.mwf
(25.99 MiB) Downloaded 393 times

To run automatic analysis, in the USB Oscilloscope software select menu Analysis => Execute script
than select
Select.png
Select.png (7.81 KiB) Viewed 2813 times

Dave08902
Posts: 3
Joined: Sat May 20, 2017 11:10 am

Re: Nissan Rogue 2010 2.5 - CSS Test

Post by Dave08902 » Sun Jun 11, 2017 1:08 am

Thank You for the converted file.

The analysis shows how well the VVT changes with throttle changes. :D

Dave08902
Posts: 3
Joined: Sat May 20, 2017 11:10 am

Re: Nissan Rogue 2010 2.5 - CSS Test

Post by Dave08902 » Fri Jun 16, 2017 11:41 am

Efficiency_zpszhnumq47.jpg
Efficiency_zpszhnumq47.jpg (87.34 KiB) Viewed 2734 times
Tooth Disk_zpssjcmaehr.jpg
Tooth Disk_zpssjcmaehr.jpg (71.4 KiB) Viewed 2734 times
Ignition Timing_zpsagea19iz.jpg
Ignition Timing_zpsagea19iz.jpg (53.06 KiB) Viewed 2734 times
Phase Tab 2_zpsudvmma86.jpg
Phase Tab 2_zpsudvmma86.jpg (127.35 KiB) Viewed 2734 times

Post Reply